Shindengen SH847

[Geekmaster]

Yes, sorry for not being more precise. I meant the female plugs on the new regulator line up with the existing male plugs that were used on the original regulator. It’s literally plug and play.

 

[globalrider]

Does anyone have the the manufacturers specifications (Shindengen?) for both of the following rectifier/regulators?

FH020AA (I am assuming that is the BMW 12 31 8 523 367 item)
SH847

 

[chrismiii]

Yes, sorry for not being more precise. I meant the female plugs on the new regulator line up with the existing male plugs that were used on the original regulator. It’s literally plug and play.

No problem i know what you were trying to say, but thanks for your clarification. I appreciate all your work and your post too! The forums are just terrific for something just like this!

 

[Omega Man]

Does anyone have the the manufacturers specifications (Shindengen?) for both of the following rectifier/regulators?

FH020AA (I am assuming that is the BMW 12 31 8 523 367 item)
SH847

This may help-

Regulators/Rectifiers | Motorcycle Products | SHINDENGEN ELECTRIC MFG.CO.,LTD

Introductions to Shindengen Regulators/Rectifiers information.

www.shindengen.com

You can let us know what you think.
OM

 

[globalrider]

This may help-

Regulators/Rectifiers | Motorcycle Products | SHINDENGEN ELECTRIC MFG.CO.,LTD

Introductions to Shindengen Regulators/Rectifiers information.

www.shindengen.com

You can let us know what you think.
OM

Not very helpful. Maybe if I e-mailed them I can get specifics for each rectifier/regulator. For example Vset, Temperature Compensation, current rating, etc.

For example, I have Bosch regulator catalog for cars listing Vset, slip-ring diameter, Temperature Compensation -XmV/°C, etc.

Also, for the AGM batteries we have in our motorcycles, Vset at 14.2V is far too low for the temperature. I would hope to see 14.6V +/- based on temperature.

I also came across a site where an owner installed a temperature sensor in the stator. I cannot comment on how accurate it all is as I do not know if he worked in a lab, etc. but he was seeing a 25F give or take a few degrees less using the Series regulator.

Seth’s Shindengen SH847 Series Regulator Rectifier (R/R) Installation on a Honda Pacific Coast PC800

I've also attached a PDF discussing how an alternator, rectifier/regulator operates along with testing procedures. I did not read it all, so use it at your own risk.

 

[chrismiii]

I'm following your example and installing the same as you. I posted some pictures of my old stator too! Thank God I purchased the extended warranty!!!!