•  

    Welcome! You are currently logged out of the forum. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please LOG IN!

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the benefits of membership? If you click here, you have the opportunity to take us for a test ride at our expense. Enter the code 'FORUM25' in the activation code box to try the first year of the MOA on us!

     

R1200RT 2013 - Right Low Beam headlight turns on when started, after running a few minutes, get right bulb failure

Status
Not open for further replies.
So here is what I tried. First if the rt bulb light shuts off, if I turn ign key off then on, it comes back on with no other action, then goes off again later, so a heat issue or bad connector would not be that problem as it happens whether the bike is running on the street or in the garage. I also tried different bulbs, added a resistor even though the bulb was suppose to be canbus compatible. Swapping rt to left, the problem still ends up on the rt side. if the bulb was not canbus, I should have the same issue on the left side.
:thumb
If the “different” bulbs were not stock, I would try a stock bulb……perhaps both stock.
OM
 
I will move my post to the other forum, so sorry I caused such a fuss about posting in the wrong board and cause some folk real stress here. so much for team help, for those that tried thanks,
NO WORRIES!
I can move the whole thread for you!
Bikes on the “cusp” of a model year change generally don’t draw any confusion. It’s not a big deal.
OM
 
I will move my post to the other forum, so sorry I caused such a fuss about posting in the wrong board and cause some folk real stress here. so much for team help, for those that tried thanks,

No need for you to do anything...the Moderators can take care of it!!
 
I will move my post to the other forum, so sorry I caused such a fuss about posting in the wrong board and cause some folk real stress here. so much for team help, for those that tried thanks,
Do you have a GS911 diagnostic tool? It seems like it would be recording a fault when that happens, which might aid diagnosis.

:dunno
 
Status
Not open for further replies.
Back
Top