First change on my new to me R100RT w/oil cooler. I removed 3 allen bolts in oil filter housing. The aluminum washer was between big "O" ring and filter, right? Then there is a smaller "O" ring in the oil filter cover.
When I replace the cover assembled as described, the cover doesn't seat easily. There is pressure required to make the cover seat. It feels like too much pressure. I used a two piece filter as supplied by Capital Cycles in DC.
Is the aluminum shim washer optional?
Thanks,
Campbell Tellman II
'93 R100RT
When I replace the cover assembled as described, the cover doesn't seat easily. There is pressure required to make the cover seat. It feels like too much pressure. I used a two piece filter as supplied by Capital Cycles in DC.
Is the aluminum shim washer optional?
Thanks,
Campbell Tellman II
'93 R100RT