I recently changed my oil and filter. I put in the 3 litres of oil as stated in the oil capacity specs. Then, I ran the bike using the recommended protocol to check the oil level using the dipstick. Checking the dipstick, I found that the oil level was at the minimum mark. I repeated the protocol after the oil had cooled, and the result was the same.
Am I missing something here? Is the capacity specification with or without a filter change? Or could there be a potential problem with the motor?
Thank you in advance for any enlightenment.
Am I missing something here? Is the capacity specification with or without a filter change? Or could there be a potential problem with the motor?
Thank you in advance for any enlightenment.