tasslehawf
New member
I recently tore out my servo brakes and replaced them with hard brake lines. All is good with that. I did remove the servo unit but ket the ecu plugged into the wiring harness.
When I put the bike back together, it wouldn't start. My hex tool is telling me: 10167 : Output stage to Electric Fuel Pump faulty
This would seem to point to the Fuel Pump Controller, but I tested it with a brand new one I just installed in another bike. Could it be the fuel pump?
I was careful to reinstall all the connectors to the fuel tank and double checked in the service manual.
When I put the bike back together, it wouldn't start. My hex tool is telling me: 10167 : Output stage to Electric Fuel Pump faulty
This would seem to point to the Fuel Pump Controller, but I tested it with a brand new one I just installed in another bike. Could it be the fuel pump?
I was careful to reinstall all the connectors to the fuel tank and double checked in the service manual.