efiedler
Hook
I am about to replace the front tire on my '22 R1250RT and the first step I performed was removal of the front (painted) tip of the front fender. I had hoped this would give me enough room to remove and roll the front tire away from the front of the bike once I jacked the bike up ever so slightly. Instead it seems that the remaining part of the front fender (see attached) extends a bit much and would require me to jack the bike up a good 6 inches to free it. I'm afraid by jacking the bike up that much it may cause the bike to tip over. So, I unfastened the two screws on the remaining fender part wiggled it but it was not cooperating. Asking for advice. Do I need to remove the remaining part of the front fender to remove the front tire? Don't want to break the fender.