broumandan
New member
How much did you pay for your Trans. Spline Lube???
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Nothing, I do it myself. No parts needed besides the lube which I have lots of on hand.
depends on how worn the teeth splines on the input shaft are and the teeth on the Clutch are... mine was about $1000 a few years ago when my input shaft went... had to put in a new clutch at same time.. .if you are in there and the clutch is more than 50% worn might as well replace it ... it is a mostly a labor job more than anything... ask you dealer how many hrs they figure.. it is abotu a day job in there books..
I got an estimate for $800 for just lubing and replacing the trans seal...???little high.
sounds about right at a 70 dollar or so labor rate. thats what i was quoted for replacing my rear main seals. needless to say i did it myself. like others have said, not an overly difficulty DIY job, just a fairly long one.
How offten shold you lube the spline?
How offten shold you lube the spline?