O
oldowan
Guest
You guys were dead on, it was the valve clearance (all four). I had never done that adjustment before as the bike is still new to me. I took out my manual and followed the procedure ( had to run out in the middle of it to buy a torque wrench). All the valves had 0 clearance. I thought I was doing something wrong, so I went through the whole thing again. Sure enough, 0 clearance on all four. I set them all to spec, put it all back together, started it up and it idled just fine, no coughs or hiccups.
I just wanted to thank all you guys for your help, it was invaluable.
If you're ever passing through Denver, give me a ring because I owe you a beer or two.
Thanks again,
Mark Reidy
Denver
720.256.7552
I just wanted to thank all you guys for your help, it was invaluable.
If you're ever passing through Denver, give me a ring because I owe you a beer or two.
Thanks again,
Mark Reidy
Denver
720.256.7552