jconway607
JohnWC
I"m overhauling a 91 k75s and had a couple of questions. The book seems to indicate there is no gasket for the oil pan. Is that correct? Just Sealant? If so, I gather I will use the black tube stuff from Autozone unless someone recommends something else. The bike has sat and I thought I should remove the pan, clean the oil intake screen, and maybe be able to clean off the inside of the sight glass while I am at it. Does that all sound reasonable?
Second, the Clymer manual recommends a coolant mix of 60 water/40 antifreeze for better cooling. I usually use a 50/50 mix for everything but I"ll mix up a special batch (with distilled water, also recommended) if everyone agrees that the 60/40 mix cools better.
Last,(for the time being), what is the red hazard light that sits above the neutral light on the dash, for? I don't have a handbook for the bike yet. Thanks.
Second, the Clymer manual recommends a coolant mix of 60 water/40 antifreeze for better cooling. I usually use a 50/50 mix for everything but I"ll mix up a special batch (with distilled water, also recommended) if everyone agrees that the 60/40 mix cools better.
Last,(for the time being), what is the red hazard light that sits above the neutral light on the dash, for? I don't have a handbook for the bike yet. Thanks.