ohiorider
New member
The H4 low beam was burned out, so I attempted to change the bulb. But I'm afraid the wire spring clip that holds the H4 in place broke loose from the socket. It appears I may have broken the white plastic bulb socket where the clip is attached. I think it might be possible to remove the headlight assembly and repair the plastic that holds the clip (not the right side where it locks .... the left side where the clip pivots.) It doesn't appear on Max BMW fiche to be a separate part, but is part of the $300 + headlight assembly.
Can anyone provide some workarounds that might not break the bank, and some hints for accessing this part short of removing the 'roo' bar and fairing (if that's even possible!)
Thanks in advance for any assistance.
Bob
MOA: 56434
Can anyone provide some workarounds that might not break the bank, and some hints for accessing this part short of removing the 'roo' bar and fairing (if that's even possible!)
Thanks in advance for any assistance.
Bob
MOA: 56434