I hit a very large pot hole while riding and bent the front wheel on the GS.
Have it down at Woody's Wheel Works for repair.
After reading the replacement procedures for the two front rotors the BMW shop manual recommends replacing the 10 bolt that secure them to the hub.
Is this really required or can you clean up the old bolts and add a loctite to them and reuse them ?
These are not small bolts and the torque is only 19 nm
Thanks
Dave
Have it down at Woody's Wheel Works for repair.
After reading the replacement procedures for the two front rotors the BMW shop manual recommends replacing the 10 bolt that secure them to the hub.
Is this really required or can you clean up the old bolts and add a loctite to them and reuse them ?
These are not small bolts and the torque is only 19 nm
Thanks
Dave