2004 1150RT Carbon Fiber valve cover / How to install

[Beemahdad]

https://www.ebay.ie/itm/BMW-R1100RT...061355?hash=item362b8f8a6b:g:nv0AAOSwPhdVCyPB

Hi
My 04RT was laid down on both sides by the previous owner and one of the cheaper options I didn't completely think my way through were these covers. Has any other owner out there tried these and can give any tips on how to mount them. When I got them, I thought more about using these but because the sparkplug wire has to be pulled before the cover has to come off before the valve can be pulled, I am going in circles how to use these covers.

Thanks for your interest and comments in this post

Sunny

 

[kioolt]

Isn't that just a cover that goes over the original valve cover? It states that longer bolts are required but not supplied. Just loosen the valve cover bolts and pull them out as far as they will easily go. You should be able to remove the stick coils then.