52184
GTRider
2004 R1150RS, a barn find sort of. When the bike was last ridden the ABS system was inoperable and the bike sat for a number of years. With a known good battery installed, when the key is turned on all lights on the bike—head, tail, brake, turn signals, and dash—light up and remain on. Activating a turn signal causes the signal to flash normally, but as soon as the signal is canceled the TS remains solidly lit up. There are no aftermarket TS enhancements installed. Also, I am unable to kill any light except taillight by pulling fuses. Hi/Low beam function normally, horn works, but brake light stays on.
My GS911 can find and communicate with the ABS controller, but cannot find or communicate with the ECU. I’m wondering if this is a bad ECU or a bad switch. Anyone see such an issue?
Thx,
DeVern
My GS911 can find and communicate with the ABS controller, but cannot find or communicate with the ECU. I’m wondering if this is a bad ECU or a bad switch. Anyone see such an issue?
Thx,
DeVern