-
Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password. If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?
-
Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.
The Election forum is here: Election Forum
Helmet/gear rack project for me and the Mrs.
- Thread starter rangerreece
- Start date
rangerreece
RangerReece
mikegalbicka
Back in the saddle again
Nice job. Want to make a few more? For some spending money of course.
rangerreece
RangerReece
Easy DIY
I would but it's fairly easy to make. Rhonda bought all the components at lowes. The main component is a shelf brace $17 the hooks $3 the ball on top $8. Total $28ish. I mounted the shelf brace using dry wall screws, drilled holes for the hardware on the ball and hooks, stained, (let dry thoroughly to ensure no excess stain transfers to your helmet lining, I added a coat of clear coat also) it took a couple of hours. PM me or call if you need help. I'd be more than willing to talk you through it. I think my cell phone number is in profile info but in case it's not, 334-470-7770.
Note: I wanted to keep the gear climate controlled and clean; my motivation for bringing the gear in from the garage. The electronics and proximity to the wall outlet; also a major motivation for getting the schuberths mounted. All and all, well pleased with the project.
I would but it's fairly easy to make. Rhonda bought all the components at lowes. The main component is a shelf brace $17 the hooks $3 the ball on top $8. Total $28ish. I mounted the shelf brace using dry wall screws, drilled holes for the hardware on the ball and hooks, stained, (let dry thoroughly to ensure no excess stain transfers to your helmet lining, I added a coat of clear coat also) it took a couple of hours. PM me or call if you need help. I'd be more than willing to talk you through it. I think my cell phone number is in profile info but in case it's not, 334-470-7770.
Note: I wanted to keep the gear climate controlled and clean; my motivation for bringing the gear in from the garage. The electronics and proximity to the wall outlet; also a major motivation for getting the schuberths mounted. All and all, well pleased with the project.
mikegalbicka
Back in the saddle again
Thanks for the outline. Should be all I need, other than the time!
rockbottom
Steve
I keep wishing someone would make a UV sterilizer for motorcycle helmets like the ones they make for sneakers.
rangerreece
RangerReece
I can see me now, middle of the night, turn over half asleep ....& think it's the alien's come to get me...
Now that funny.
rangerreece
RangerReece
Not a firefighter, did many a QRF mission during the surge of 06-07. Me and my battle rostered crew member were able to cross the wire outbound from trigger pull on the collective fully fueled and armed in about 8 minutes as memory serves.
