My 04 Rt has 43k on it, the clutch starting slipping when high on rpms earlier in the year. I figured it was some oil from the rear seal, tranny seal or slave cyl. I have it down to the clutch & their is no oil leaking anywhere except right by the slave cyl. But where the push rod goes into the whole on the clutch spring plate it is off center & I drained the tranny fluid & it is dark gray. I bought it last year with 26k on it, when I got it I tore it apart to do a spline lube but never took apart the clutch, the push rod is straight not bent at all. Here is a picture of what it looks like, I'm going to go ahead and take the clutch apart. Any thoughts on any of it, and if the fluid being dark gray is o.k. Thanks Josh.