•  

    Welcome! You are currently logged out of the forum. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please LOG IN!

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the benefits of membership? If you click here, you have the opportunity to take us for a test ride at our expense. Enter the code 'FORUM25' in the activation code box to try the first year of the MOA on us!

     

Steam cleaning?

Thanks Ken,saved me from buying one.I guess it's time for the super clean,scotchbrite pads and elbow grease.
 
As a comment: If you work with Super Clean it becomes obvious gloves are needed because it burns the skin. Super Clean is a sodium hydroxide (strong base) cleaner/degreaser which is great on grease and oil, but attacks aluminum. For example, the quickest way to remove anodizing from aluminum is with sodium hydroxide. Spot use and flushing afterward with plenty of water should prevent damage of aluminum.

The Super Clean MSDS is linked in this page: http://www.supercleanbrands.com/products#15

Edit: FWIW, I have a similar situation and may use an automotive engine degrease product. I have citrus cleaner (i.e. ZEP) from bicycle chain cleaning and have read it is good with aluminum, but have not tried it.
 
Last edited:
When I worked in the lift truck shop of a tire plant, we steam cleaned the engine compartment or other assemblies prior to repairs. This was due to them being coated with carbon black(think black talcum powder) in huge globs everywhere! This was industrial steam and very powerful & it does clean!!!! It also is very hard on things similar to a motorcycles more delicate parts such as control cables. Having no idea about the machine mentioned , I can say steam cleaning works very well indeed but if powerful you gotta be careful! It gets into EVERY crevice! & moisture comes with steam. I would think of it as a pre-overhaul procedure only.
 
Last edited:
CO2 Blasting

If u can find a business around u that does dry ice blasting, the process is magic. The dry ice pellets are used to blast the surface clean, much like sand blasting. But there is no sand or water residue. The CO2 just vaporizes into the air. And the force can be adjusted as needed. Do a goggle search and check it out. Good luck!
 
Cleaning grease

Engine Brite Gunk. No damage to anything but it smells for a while. Do not use it over asphalt or tar roads it will dissolve them.
 
Back
Top