I have a 1981 R100RS and am contemplating removing the fairing,( including front and rear fenders, side panels and seat for painting. Once completed, I intend to remove the wheeels and have them sent out for powder coating after removing the disc brake assembly and having the bearings removed. Although I am reasonably mechanically competent, I'd like to hear of any particular difficult areas involved in the removal of the fairing, or any tips from those who have gone on this path previously.
I also would like to swap out the stock handlebars of the RS for a set that are a bit higher and closer; at age 55 my wrists and shoulders do not enjoy the forward riding positon quite as much. Many thanks.
This is my 9th BMW; I currently have a 1968 R60US and a 1971 600/5 in addition to the RS..over the years I've enjoyed tinkering with the bikes, but this is the largest job attemped.
I also would like to swap out the stock handlebars of the RS for a set that are a bit higher and closer; at age 55 my wrists and shoulders do not enjoy the forward riding positon quite as much. Many thanks.
This is my 9th BMW; I currently have a 1968 R60US and a 1971 600/5 in addition to the RS..over the years I've enjoyed tinkering with the bikes, but this is the largest job attemped.