•  

    Welcome! You are currently logged out of the forum. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please LOG IN!

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the benefits of membership? If you click here, you have the opportunity to take us for a test ride at our expense. Enter the code 'FORUM25' in the activation code box to try the first year of the MOA on us!

     

Crush washer blues

larrydk

New member
Got the super convienent super maintenance pack from beemer boneyard...awesome service and delivery, thanks

Unfortunately, the kit was missing two crush washers

On my 2004 r11s the final drive fill plug uses a larger crush washer than the other four provided, and the transmission drain plug is really big, no crush washer in the kit for that

Not too worried about the final drive fill plug, I reused the old crush washer, don't see leaking being a reality at the top of the case.

The tranny drain plug did not have a crush washer on it when I removed, so I'm guessing not all that critical, but it does make me a bit nervous

Should I acquire the correct crush washer and redo the tranny oil?

Thoughts?
 
crush washer on drain plug of tranny

Thanks......I saw that exploded diagram also but wondered if they showed crush washers?

Actually found documented that some ("some") r11s's have no crush washer on tranny drain plug. Clymers does not have that documented.

Good news was that the drained fluids were not terrible, not new, but not 15000 miles old either....I purchased the bike from owners in CO, it's in really nice condition but the only documented service was the 600 mile break in completed in 2005 (2005 r11s).

This weekend oil and valves, hoping to find equally good conditions.

Thanks for the reply
 
Odd but not a biggie: the fische for my '04 RT doesn't show a crush washer on the trans drain plug either, but it's been there since Day One, so I've always renewed it. I figure it can't hurt and it may reduce the possibility of over-tightening.
If you get the official BMW "oil change kit", that's the filter plus a big collection of crush washers, everything you need (so I have extras - always good!).
 
Back
Top