• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

center stand "tang" fix

9842, a good way to repair your tang is to get a 6" or so skinny bolt approximately the diameter of the tang. The bolt should have short threaded part, not threaded all the way. Then grind off the remnant of the tang. Drill a hole thru the center stand, the exact diameter of the bolt. Slide the bolt thru the hole and have it welded in place. Cut off the threads. Mount the stand and bend the bolt/tang to suit.

That's exactly what I did after it snapped off twice, haven't had a problem since. I used the unthreaded portion of a long 5/16 bolt.
 
Back
Top