roger 04 rt
New member
The other day in my haste to get the O2 Sensor unplugged ( Open Loop AFRs ), one of the fairing connection tabs on the left hand fairing, caught on the cylinder head fins and broke.
The tab separated in two places:
In photos 1 and 2 you can see where it cracked and separated from the main fairing.
In photos 3 and 4 you can see where it was thermally welded to an inner plastic attachment.
My hope is that I can use a high performance plastic glue to repair the crack and then an epoxy glue or contact cement to re-weld two black areas. I don't know if I will need to reinforce with bolts and nuts or other, in the former thermal weld area.
I am a novice with plastic and glue so would appreciate any ideas or glues that could be used.
RB
The tab separated in two places:
In photos 1 and 2 you can see where it cracked and separated from the main fairing.
In photos 3 and 4 you can see where it was thermally welded to an inner plastic attachment.
My hope is that I can use a high performance plastic glue to repair the crack and then an epoxy glue or contact cement to re-weld two black areas. I don't know if I will need to reinforce with bolts and nuts or other, in the former thermal weld area.
I am a novice with plastic and glue so would appreciate any ideas or glues that could be used.
RB