I am having a problem reinstalling the fairing side panel screws after removal for several tasks(fuel filter relocation, throttle body sync, and installation of an AF-XIED. My problem is with the three top screws on each side of the fuel tank. These screws go through the side panel, then through tabs on the fuel tank top cover, and then screw into the fuel tank. The tabs on the top cover aren't aligned with the holes in the fuel tank. Seems like the top cover shrank. Maybe all the rain we have had in Colorado lately. I tried removing the fuel filler cap screws to free up the top cover and checked for any obstructions, but the tabs are still +1/8 inch out of line. I did manage to get three screws in on one side but now the other side is even worse. I thought some of you who had taken the tupperware off numerous times might have some tricks to share. A minor issue but frustrating. I have two K bikes, 85 and 91 that I have taken apart numerous times without any issues like this.