• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

02 K1200RS Brake Failure

oemor722

New member
When I left for my ride today.. It took longer than normal for my brake failure light to shut off. I unknowingly rode down the road with no brakes. When I slowed to a stop... The brakes kicked in. I went for my ride with no problems. After I returned and shut the bike off as I was at a friends. I turn the bike on and Brake Failure light blinks slow 4 times and then constantly and a much faster pace. No brakes at all. Any ideas?

Thanks-
 
Does the 02 model have the electric servo brakes? Any type of failure there will leave you with only "residual" braking, which ain't much! As I recall, under the seat on my 03 K bike, there was a sticker that explained the meaning of the brake failure light modes. In your owners manual as well. Most owners agreed the servo brake system was an over-engineered solution to a non-existent problem. Took BMW a bit too long to come to the same conclusion. Having said that, I really miss my K bike. Should have kept it longer.
 
Does the 02 model have the electric servo brakes? Any type of failure there will leave you with only "residual" braking, which ain't much! As I recall, under the seat on my 03 K bike, there was a sticker that explained the meaning of the brake failure light modes. In your owners manual as well. Most owners agreed the servo brake system was an over-engineered solution to a non-existent problem. Took BMW a bit too long to come to the same conclusion. Having said that, I really miss my K bike. Should have kept it longer.



Turns out it's the battery. Battery is about 3 yrs old. Not holding a charge... Was only putting out about 11V. I guess Servo needs to sense 13V+ to "engage". Charged battery... Pushing 14V running... Brakes fired up... I rode home. I'm glad all I need is a new battery... Whoop Whoop!!

Enjoy-
 
If the ABS doesn't engage due to a low battery, you should still have had the non-boosted brakes working. It may feel like "no brakes" compared to the light touch with boost, but there should always be some level of braking available.
BMW baffled a lot of folks when they added the e-brakes, but they were smart enough to not let a bike go completely brake-less due to an electrical problem.
 
Back
Top