I just purchased a heated jacket liner made by Warm & Safe for First Gear. I wondering which is the best way to connect to the power. The easiest way it would seem would be to use the SAE pigtail or one of the ports, but the Warm & Safe video advises against that and recommends using the furnished wiring harness to connect directly to the battery terminals. I was hoping to avoid the hassle of removing the battery. Also the pigtail is on the right of the bike (2015 RT) and the pouch pocket for the heat troller receiver is on the left (naturally). I was eyeballing the length of the pigtail to see if it would reach to the other side, but I think it looks a little short.