Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I had a 2018 RT. It should be the same front end assembly. I never used a hex axle tool. I would slide the axle in place, run in the nut, tighten the clamp on the left leg and torque the axle nut. Then loosen the left side clamp and make sure it is "settled in" and retighten the clamp.OK BoxFlyer, but one has to hold the axle somehow to torque the bolt, right? Nice straight forward video, Thanks
You might like to use these as a reference around your garage as well.
The Panel Screw sheets I get printed on 12x18in paper at FedEx Office and then use spray glue to mount them to a double layer thickness of dollar store foam core board.
Just poke the screws right thru the print into the foam core board as you take the screws out...it is handy for the first time you work on your bike to "un-screw" where the screws really should be!
Brad