natrab
New member
Well, I searched as best I could, but did not find anything. I know some dragging of the brakes on the rotors is normal, but my bike has this to a problematic degree where I notice a waver in my front wheel when starting in first gear and it's very difficult to push the bike. It does appear to be wearing my rotors excessively as well. We're talking it's difficult to spin the front wheel at all, and it basically moves as far as you push it then stops.
Both calipers seem to be acting fine. The pistons move freely and push back as normal. When the calipers are off, the wheel spins freely and appears as it should be.
Once the calipers are remounted, the wheel continues to spin with very minimal drag. Once the bike starts up and the brakes are applied, the drag resumes and the.
The brakes were just bled by Ted's BeemerShop and they said everything appeared to be in spec and working normal. There was one old fault code for an overpressure in the ABS system that we haven't been able to reproduce.
Any ideas?
Unfortunately, I just bought this bike and this problem was not disclosed to me at the time so I don't have any details on the bike's history.
Both calipers seem to be acting fine. The pistons move freely and push back as normal. When the calipers are off, the wheel spins freely and appears as it should be.
Once the calipers are remounted, the wheel continues to spin with very minimal drag. Once the bike starts up and the brakes are applied, the drag resumes and the.
The brakes were just bled by Ted's BeemerShop and they said everything appeared to be in spec and working normal. There was one old fault code for an overpressure in the ABS system that we haven't been able to reproduce.
Any ideas?
Unfortunately, I just bought this bike and this problem was not disclosed to me at the time so I don't have any details on the bike's history.