Like many, the clutch switch on my R1100R has failed. I have read several threads, primarily related to the RT, on how to remove the switch. The consensus is to clip the wires and use a thin walled, deep 11mm socket. Unfortunately, I have had no luck as the 12 pt deep socket I am using will not even 'bite' the nut as it is too deeply recessed in the curved handle bar. I don't know whether the handle bars are different, but its not oblivious how to get the socket in there.
I've had one serious incident in heavy traffic when the bike stalled and I couldn't find neutral...not fun! Any advice on how best to remove the switch and replace with a new one would be greatly appreciated.
I've had one serious incident in heavy traffic when the bike stalled and I couldn't find neutral...not fun! Any advice on how best to remove the switch and replace with a new one would be greatly appreciated.
Last edited: