R
RCHANDL
Guest
I'm building a k100 (1985-ash) from parts I bought on ebay, one piece at a time.
It's all assembled but wont start. I have power to the green and yellow coil wires
but none to the black/ red or black/ blue. These come from the Ignition Control Unit.
I believe I have fuel. Should I replace the Hall Transmitter and ICU or can these be tested?
Thanks!
It's all assembled but wont start. I have power to the green and yellow coil wires
but none to the black/ red or black/ blue. These come from the Ignition Control Unit.
I believe I have fuel. Should I replace the Hall Transmitter and ICU or can these be tested?
Thanks!
Last edited by a moderator: