Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
only concerns so far is; running straight down the road bike is quiet, as i bank into a corner either side, on or off thottle there is a humming noise, sounds like from the front of the bike but my hearing isn't great. Am suspisious of a front wheel bearing, but the noise is the same on either side and I can't feel any play in the wheel when up on the center stand. Any ideas? will tires side tread make a bit of noise? the front tire is almost new. Other concern is with the bike on the stand in gear there is about and inch of travel of rotating the wheel before all slack is taken up. The bike was inspected by Big Twin in Boise and nothing was mentioned amiss.
Post the slack question in oilheads & you'll get some infoonly concerns so far is; running straight down the road bike is quiet, as i bank into a corner either side, on or off thottle there is a humming noise, sounds like from the front of the bike but my hearing isn't great. Am suspisious of a front wheel bearing, but the noise is the same on either side and I can't feel any play in the wheel when up on the center stand. Any ideas? will tires side tread make a bit of noise? the front tire is almost new. Other concern is with the bike on the stand in gear there is about and inch of travel of rotating the wheel before all slack is taken up. The bike was inspected by Big Twin in Boise and nothing was mentioned amiss.
only concerns so far is; running straight down the road bike is quiet, as i bank into a corner either side, on or off thottle there is a humming noise, sounds like from the front of the bike but my hearing isn't great. Am suspisious of a front wheel bearing, but the noise is the same on either side and I can't feel any play in the wheel when up on the center stand. Any ideas? will tires side tread make a bit of noise? the front tire is almost new. Other concern is with the bike on the stand in gear there is about and inch of travel of rotating the wheel before all slack is taken up. The bike was inspected by Big Twin in Boise and nothing was mentioned amiss.