A question for you anal clean freaks out there

[bobs_one]

Sandpaper

So, typically only a very thin layer of plastic gets faded/yellowed by UV. If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.

 

[BC1100S]

So, typically only a very thin layer of plastic gets faded/yellowed by UV. If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.

Good idea. I'll give that a try and report back.

 

[BC1100S]

If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.

I used 600 and it worked great. Two thumbs up to you, sir!

 

[akbeemer]

I used 600 and it worked great. Two thumbs up to you, sir!

Hallelujah!!