mcmlcccvrs
New member
I am getting ready to install a pair of CREE 10W 800 lumen auxiliary driving lights on my front forks utilizing the front fender forward mounting location. I haven't decided how I am going to connect it electrically yet. I have an unused accessory harness which used the positive terminal on the alternator and is fused. If I wanted to use this harness would I need to fuse the lights because I would be running them off of the alternator? I believe I also have a heated handgrips 2-wire connector ( brown-green/black) under the tank that will work too. I would just have to snip the connector off and make up a pair of molex connectors.
Thoughts?
Thanks,
Tom
Thoughts?
Thanks,
Tom