evojet
New member
Recently I rebuilt the front forks. All new seals gaskets and fluid. I torqued everything to spec and all seemed good. I have yet to ride the bike. I keep a cardboard under the front tire while I work on things. I noticed two wet spots under the forks. Sure enough the forks are dripping from the bottom copper crush washer. I thought maybe I didn't put them on correctly or something so I ordered and installed another set. Still dripping. I tried to tighten them further and it helped...for a bit. Still dripping. It's not a huge amount but it shouldn't leak at all. Any suggestions or information is greatly appreciated. Thanks in advance.