stalling

Greeting. New member with 2002 F650GS Dakar project bike (bought cheap, needs some work). I'm working my way through a problem I have researched quite a bit: the dreaded surge, stall, and a tachometer that goes to redline while then engine maintains constant speed. The current item on the...

Hi all, Just recently bought a 2014 g650gs Sertao w/4400 miles on it from a private seller. Ran great when I checked it out. Ran great for about 100 miles, then I noticed it surging a bit and idling erratically--varies between about 1,000 and 2,200 rpm when sitting at a stop. A few times I've...

Last summer I had my bike serviced by a dealership including a new battery. I rode from the front range of Colorado to central Utah a couple of days later. All was well. Turned around to come home and took a path less traveled which included higher elevation and cooler temps. (as did crossing...

Hi all, Those of you with K1300xx motorcycles with a stalling issue, I encourage you to make a NHTSA complaint about the issue. BMW has apparently decided not to address the issue with a recall fix. As a result many of us are left with otherwise fine motorcycles (for the most part) with a...

I began having stalling issues on my '09 K1300GT a couple of months ago after several years of trouble free operation. I did have stalling when I first got the bike but a software upgrade resolved the issue back in '09. I took it out yesterday with my GS-911 and captured two stall events with...

I have a 2007 Hexhead RT that chugs and stalls when fuel in tank reaches about 1/3 full. Has happened 3 times now, and always at the same fuel level mark. Refilling the tank seems to make it go away. I've already replaced the FPC with the new black powder coated one, and checked venting lines...

So I was out riding yesterday, not too far from home ~15 miles or so. Came to a stop at a gas station to grab a bottle of water. Started the bike up (2014 G650GS) and it stalled immediately. The bike has done this to me a couple of times since I have purchased it and I have read up on the issue...