goneregret
New member
Hello everyone. I'm about to swap out the gearbox on my 1998 K1200RS (with 50k miles) and I'm trying to collect all the tools and whatnot I'll need. In the videos I see people using a large socket with a hole cut in the side. I think it's for inserting a hex head wrench through the hole so I can hold the inside pin while I torque the larger bolt around it. Can anyone give me more details about that socket?
- What size is the socket?
- How should I cut the hole (I have a Dremel and an angle grinder).
- How large should the hole be?
I just want to get this tool made now so I don't have to fool with it later. Any other special tools I should be making/collecting? I don't need to do the clutch, just swap the gearbox.
Thanks!
- What size is the socket?
- How should I cut the hole (I have a Dremel and an angle grinder).
- How large should the hole be?
I just want to get this tool made now so I don't have to fool with it later. Any other special tools I should be making/collecting? I don't need to do the clutch, just swap the gearbox.
Thanks!