Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Honda Moly 60
Paul Glaves drove a K75 over 300,000 miles. Last seen he was at the winter meeting of the MOA. I bet he will drop by soon and give you a definitive answer.
Driveshafts on Monolever K Bikes: I originally pulled the final drive and relubed the rear splines on the driveshaft every second tire - when I was getting 8K to 10K per tire. When I went to ME 880 tires giving 14 to 16K per tire I started lubing the driveshaft rear spline every time the wheel was off for a new tire. Every 20K is good enough - but every 30 or 40K isn't.
I use a moly paste for splines. Honda Moly 60 is OK but dries out faster than I like. I mix it 50-50 with a Stalube moly grease. This gives good anti-corrosion characteristics, an EP grease, and about 30% solid moly by volume.
See if you can return the #10 - it is NOT a good lubricant, and whatever the dealer had was "old stock" - BMW recalled it all about 5-6 year ago. Then go to the Honda dealer and get the Honda Moly60.Thanks for all the great info. I was able to get the BMW #10 at the dealer in London ON and even remembered to pick up a spare clutch cable. Should be good for a while. My 93 K75S has only 32,000 miles on it so far and my intention is to wear it out. From the looks of things it mat last longer than I will...
Thanks again
Alan
My 93 K75S has only 32,000 miles on it so far and my intention is to wear it out. From the looks of things it mat last longer than I will...
Thanks again
Alan
I just happened to buy some Mercedes Sunroof grease which supposedly is rebranded Dupont Krytox GPL-105. I needed to lube my sunroof. Will this work for input splines as well?
I just happened to buy some Mercedes Sunroof grease which supposedly is rebranded Dupont Krytox GPL-105. I needed to lube my sunroof. Will this work for input splines as well?
I just happened to buy some Mercedes Sunroof grease which supposedly is rebranded Dupont Krytox GPL-105. I needed to lube my sunroof. Will this work for input splines as well?
The reason I ask is because of threads like this one mentioning krytox as being a flourinated and superior alternative to molybdenum grease. https://advrider.com/f/threads/final-drive-spline-lube.66868/