Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have had this happen to two exhaust systems on Voni's bikes. I found appropriate size exhaust pipe and drove it into the center of the exhaust and then sealed around it with JB weld. This has lasted several years.
I like itHow about an attractive pattern of stainless screws the proper length and diameter to wedge the pieces to center up? I was thinking 3 would do it.
OM
When that crack completes it’s journey around the pipe, vibration will go to work and break the pipe upstream of the unsupported end. Paul’s solution firmly supports the pipe and likely eliminates that risk.
Best,
DeVern
Wow that looks like something on A James Bond motorcycle that shoots 12 gauge slugs
2000 R1100 RT, Noticed the seam between the inner and outer part of the muffler is open. Is this something I should worry about.? It is still attached in a few spots on the top.View attachment 85080