I just acquired a 2013 K 1600 that is in need of a new rear shock. This is a new bike to me and I would like to get it repaired without having to do a second mortgage on my home! Appreciate any info or suggestions on the most affordable options and sources for replacement parts. I see some used shocks on eBay but not sure about purchasing used since they could also have issues.
-
Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password. If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?
-
Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.
The Election forum is here: Election Forum
Rear shock woes
- Thread starter lubedude
- Start date
etiennelau
Member
How much you looking to spend? I just had both front and rear rebuilt by Ted Porters.
jpruddyt2
New member
I purchased a WILBERS 644 WESA SERIES REAR SHOCK and replaced it myself on the same year bike, except I had the GTL. It's not hard, just takes time removing the parts and lifting the rear subframe up. The shock in 2018 was $680.00. Service manual is needed, but they're fairly easy to get.
Furman
Manic Mechanic
Contact this shop. They can rebuild your BMW shock or set you up with a Wilbers aftermarket shock. https://epmperformance.com/
kbasa
Well-known member
If you're replacing the shock, ensure that whoever sells it to you asks you about your weight, what you carry and whether you ride two up or not. In my experience, BMW typically doesn't have enough spring, so when loaded their bikes feel like they're pushing in corners.
When I put Ohlins on the RT, Ted Porter spent some time talking with me about how I rode, what we were usually carrying, how much it weighed, etc. When I got my shocks, the spring rate was perfect, he'd preset the rebound damping and it only need a click or two to be absolute perfection.
I can't recommend Ted highly enough. Suspension is all he does these days.
When I put Ohlins on the RT, Ted Porter spent some time talking with me about how I rode, what we were usually carrying, how much it weighed, etc. When I got my shocks, the spring rate was perfect, he'd preset the rebound damping and it only need a click or two to be absolute perfection.
I can't recommend Ted highly enough. Suspension is all he does these days.
