K1300GT extending rear lights

[popi]

Hi guys,

On my K1300GT 2010 i want to double/extend the rear brake light and the rear turn signals for more security under sunny weather : do you know an electronic box that is able to spy the CAN bus signals to detect commands and control the ignition of rear additional stop and turn lights ?

Thanks for your help
Paul

 

[52184]

On my 2010 K1300GT I’m running Skene P3 lights and an Admore light kit for a Shad topcase. No special box required, both add-on kits are tied directly into the taillight/brakelight wiring. The Skene kit does require a 12v switched supply, which I’ve supplied via a Fuzeblock. No additional turn signals, tho.

Best,
DeVern

 

[drneo66]

Hi guys,

On my K1300GT 2010 i want to double/extend the rear brake light and the rear turn signals for more security under sunny weather : do you know an electronic box that is able to spy the CAN bus signals to detect commands and control the ignition of rear additional stop and turn lights ?

Thanks for your help
Paul

I'd highly recommend the Admore light bar. Skene is good too, but I like the extra features of the Admor - https://admorelighting.com/

 

[popi]

I found the EZCAN that seems very simple and can bus compatible : https://www.obdauto.fr/hex-ezcan-generation-iii-f800-c2x31830199
it runs on K1300GT (K44)
watch this video : https://www.youtube.com/watch?v=0wyMCMryQ6c
Installation is simple : plug on Can bus, connect to battery, connect up to 4 accessories (connectors included) and use software to configure each one