1961BMWR69S
1960R100S
Hello every one. Will I am o most done with a 2 year long conversion bike build. Took one year to get all the parts together. I don't know if any one is thinking about building one or doing one right know. My starting point was a 1965 frame, had a 77 R100s motor(last year for mech tach ), /5 headlight bucket and speedo, r65 lens-reflector H4 bulb, /5 wiring harness. I put the coil,starter relay, volt reg all under the tank with fab up brackets. The gas tank has a fuel valve on both sides know. /5 starter switch. Keeping the stock horn and headlight switch from a /2. The big thing I had a problem with was the drive shaft. I won't to use a /7 with a mech /2 bell but did not fit. Got the adapter plate and using a /2 drive shaft. I can wait to ride this bike. As soon as I'm done ill put pic up.
Last edited: