•  

    Welcome! You are currently logged out of the forum. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please LOG IN!

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the benefits of membership? If you click here, you have the opportunity to take us for a test ride at our expense. Enter the code 'FORUM25' in the activation code box to try the first year of the MOA on us!

     

  • USERNAME CHANGES-Please see the "how to" in the ONLINE CENTRAL Section.

Hill Start Control

Z

zeeklu

New member
I have a 2016 K1600GT. I bought it 2 years ago and never saw the hill start control until I first took it out this spring. I really don't care for it but in the settings under vehicle it's not listed. I'm sure it wasn't on in the fall when I parked the bike. Does anyone have any ideas on how to turn it off ? The manual doesn't show how to turn it off. Thanks, Chris
 
From the internet-

To disable the Hill Start Control (HSC) on a 2016 BMW K1600GT, you can either temporarily release it by pulling the front brake lever again, or turn it off entirely via the bike’s setup menu. Access the menu, navigate to settings, and toggle the Hill Start Control from "Auto" to "Off" or simply disable it.

HTH

OM
 
That's the thing . It's not listed in settings under vehicle or any other headings. On my 2020 K1600B it was right there under vehicle settings. Thanks for the reply.
 
zeeklu said:
I have a 2016 K1600GT. I bought it 2 years ago and never saw the hill start control until I first took it out this spring. I really don't care for it but in the settings under vehicle it's not listed. I'm sure it wasn't on in the fall when I parked the bike. Does anyone have any ideas on how to turn it off ? The manual doesn't show how to turn it off. Thanks, Chris
Click to expand...
I'm not sure that this will help as my GT is a 2023MY. The Owner's Manual directions read: Navigate to SETTINGS>ASSIST>select HSC PRO (Off, Auto or Manual are the selections available).
If this does not help, then I agree, a trip to your dealer for a software update may be in order. Good luck. Regards, Al
 
zeeklu said:
Thanks but nope. No assist in my settings. I'll call the dealer next week.
Click to expand...
Did you get this resolved? HSC is only activated if you are stopped and you squeeze the front brake hard enough. You will see a green H in a circle on the dash while it's active. If you are seeing that and you don't want HSC, try not squeezing the front brake quite as much. Hope that helps. (I know you are looking for a way to disable it in the bike menus, but this will also keep it from working).
 
You must log in or register to reply here.

Similar threads

Back
Top