tkbaker4
Love this RT!
Bought a replacement Lock Ass'y for my side case because the red tab was broken.
1st thing that has to happen is remove the Lock Barrel by using the wire (not supplied) to press in the retaining tab.
I can't locate the retaining tab with a coat hanger (my wire of choice.)
Any ideas on where I ned to apply pressure? I've tried several places thru the long slot where the instructions show to insert it and also thru the small hole below. No luck.
Never having seen the barrel outside the case I am at a loss on where to push and with what.
Any of you have any experience with changing out a lock barrel?
1st thing that has to happen is remove the Lock Barrel by using the wire (not supplied) to press in the retaining tab.
I can't locate the retaining tab with a coat hanger (my wire of choice.)
Any ideas on where I ned to apply pressure? I've tried several places thru the long slot where the instructions show to insert it and also thru the small hole below. No luck.
Never having seen the barrel outside the case I am at a loss on where to push and with what.
Any of you have any experience with changing out a lock barrel?