AF-Xied O2 sensor heater wire

[rkjjeep]

I am installing the XIED on my 1999 R1100RS this morning with a new O2 sensor. The instructions tell me to tap into the white wire on the o2 sensor harness corresponding to pin 4 of the bike harness for the +12v heater signal (to provide power to the XIED). Another forum member told me to use the o2 harness wire coresponding to pin 1. Help!

 

[20774]

Check the Similar Threads pane at the bottom of the screen. Should be some good information there.

 

[gsaddict]

Pin 4 is the + feed to the O2 sensor (the Green/white wire)

 

[rkjjeep]

Yep - it is pin 4 (green/white on the motronic side, white on the o2 sensor side). Got it installed and liking it so far.