I recently did a trans spline lube on my 1977 R75/7. With everything back together, key on, neutral light not on (trans in neutral). I figured I damaged the switch when I pulled the trans back. Removed the wires from switch and installed on another switch with it just hanging underneath the trans. Light is on and goes off when pushed in on plunger. Removed existing switch from bottom of trans and hooked up wires to it and it works ok (same as other) When you install either switch in trans light will not come on. What am I missing? I take it there is something in the trans that puts pressure on the plunger in gear and allows it to fully extend when in neutral?
Everything worked before. It will start with clutch lever pulled in.
ANyone have ideas. Thanks for the help.
Everything worked before. It will start with clutch lever pulled in.
ANyone have ideas. Thanks for the help.