pads

  1. P

    Brake pad replacement in 2019+ GS/GSA with replaced Brembo calipers

    Hi all! at 20 000 km, I am due now to replace some brake pads, front and rear, BMW has done the recall replacement of my calipers, so the old Hayes are gone and I have the big blocky-looking Brembo calipers now, I've done pad replacements on other bikes like Yamahas and Hondas, this GSA has...
  2. C

    Brake Pad Failure

    /Users/christopherweld/Desktop/Brake Pads.jpeg I have an '18 RT with just over 25K miles and got a shrieking sound from my rear brake. While suspecting a rock inspection revealed disintegrating brake pads (see photo). Is this a common experience? Pads were replaced
  3. S

    Recommended brake pad for 2002 R1150R

    I'm looking to order rear brake pads for my '02 R1150R. I am looking at the beemerboneyard site and see they offer both organic and semi-sintered. Don't know what I currently have on the bike, but they tend to grab hard at low speeds, which I don't like. Any opinions on which pads are...
  4. N

    Your thoughts on Tents, Sleeping Bags, Pads and Pillows

    I haven't camped since my early 20's, now 55 heading quickly to 56 and am toying with the idea of good gear (yikes 2 grand to get it all just to sleep; yes I'm Canadian with Canadian $ so what do you expect when our $ is so low a snake could slither over it and not notice!). I remember two...
  5. S

    87 K75S Best or easiest way to replace front rotors and pads.

    Got my new rotors and pads from ebc yesterday. Read manual, was surprised to see that you shouldn't re-use the self locking nuts to the rotor mounting bolts. Did a long search full of NLA's, superceded bys, etc and found some new ones from a dealer here in the usa.. waiting till they arrive...
  6. A

    Time for brake caliper overhaul/rebuild? ('04 R1150R)

    Hello all! Figured I'd check my pads before flushing my fluids, and noticed that the inside pads are worn slightly more (maybe 1mm) more than the outboard pads on both front brakes. Outside pads are at about 4mm and inside pads are at about 3mm. I've had no braking problems, but do...
Back
Top