fuzeblock

  1. D

    Installing Fuzeblock on 1250GS

    It seems that with every new GS model it gets harder to find space to add electronics. This is especially true for the addition of a fuse block. On my 2019 GS the only open space was behind the tail light, buried under the seat frame. I decided this was not workable for a Fuzeblock, because I...
  2. J

    Looking for an ignition-on Hot wire, any tips- 2003 k1200gt

    Hi, 2003 K1200GT bike here. "What color wire am I looking for" is the question. FYI from earlier suggestion, I have a fuse block currently connected directly to the battery. Ok for testing but I prefer to get the hot wire from one that is only ON with the ignition. I plan on connecting...
  3. D

    need a switched wire for fuse block

    Any suggestions for a switched wire to run the a Centec fuse block so I can hook up gps, vololights and givi running lights. I thought the rear accessory plug would do it but it reads voltage with the key switched off. Doubt the tail/brake light would work. This is a new to me 2011 R1200RT...
  4. S

    Fuzeblock installation on 2008 R1200R

    Need to install a Fuzeblock to wire up a Volo Lights braking and down gearing indicator. I need advice on a good location. Considering under the seat toward the rear between four support points that are under and part of the seat. Also planning to Posi-lock into the license plate positive...
Back
Top