I picked up a Zumo 595 GPS and am trying to figure out the best way to permanently wire the power for it. I was hoping not to actually splice into a wire up by the instrument cluster/controls. But I also can't see a great way to run wires from the controls back to either a SAE plug for a battery tender or the powerlet outlet; without having to remove the tupperware ideally. If I have to splice into lines by the controls I will. If I have to pop off the tupperware I will. Just trying to figure out what the best approach really is.
Temporarily I will just run the wires over the top of the tank and connect to the battery tender plug. Gaffer tape should keep the wires from flapping
Temporarily I will just run the wires over the top of the tank and connect to the battery tender plug. Gaffer tape should keep the wires from flapping