/5 Rocky Point Ignition - anyone wire one up?

I decided to get rid of the board and get the all in one Rocky Point Ignition. It was really easy to attach to the shell, unlike the boards. It came with a modest wiring diagram and I also have one in my Clymer book. I'm just wondering if anyone has done this and can save me some research.

I can't seem to upload a pic unfortunately.

What sort of research do you need? Could Rocky Point help out?

As for previous experiences, go to google and type the following in the search box:

site:forums.bmwmoa.org Rocky Point Ignition

I see a number of past threads where this ignition system is brought up.

You probably will need to resize your photo to upload...if it's no more than 2Mb big, it should upload.

20774 said:

What sort of research do you need? Could Rocky Point help out?

As for previous experiences, go to google and type the following in the search box:

site:forums.bmwmoa.org Rocky Point Ignition

I see a number of past threads where this ignition system is brought up.

You probably will need to resize your photo to upload...if it's no more than 2Mb big, it should upload.

Click to expand...

I actually did that search on Google as well as here. It turned up mostly Boyer ignition threads. There was some mention of the switch, but no discussion of wiring,

What I'm looking for is which wires from my bike go on which terminal blocks as provided by RP. The RP directions are decent, but not specific as to wire color as far as the bike wiring goes. I could call them, and maybe will. I just wanted to see if anyone here had the lowdown having done one themselves.

On the pic - I resized it way down. It's 29K so I'm not sure what the issue is. Funny thing is I just loaded a bigger one on to another thread. Oh well.

Yeah, I saw the other picture in the HD thread. So we know you can get it done!!

I did it! Had to do some sort of crazy around the world way of doing it versus just clicking the photo upload icon. But it worked.