Results 1 to 6 of 6

Thread: Breather tubes, hoses and where they go on a 2006 R1200RT

  1. #1
    Registered User
    Join Date
    Apr 2020
    Location
    Inman, SC
    Posts
    7

    Breather tubes, hoses and where they go on a 2006 R1200RT

    Greetings all
    Once again life has gotten in the way and I have not been able to get back to my projects in a timely manner.
    I took out the transmission on my 2006 R1200RT with the intention of either getting it rebuilt, rebuilding it or replacing it.
    After several discussions, I ended up replacing it with a low mileage unit.
    When I took the bike apart, I labeled the odds and ends as I always do as well as putting fasteners into bags and attaching them to the appropriate fixtures. But - the labels fell off of the hoses coming from the brake controller and the charcoal filter and I do not remember where they go.
    The first line comes from a splitter on the brake controller. I would think that this should be a vent tube. The other two hoses come from the Charcoal Cannister. I would think that the larger hose would fit onto the vacuum port of the left injector and the other hose would be a vent tube.
    Photos attached. Hose 1 is from the Brake Controller. Hose 2 and 3 are from the cannister. Can anyone verify if my assumptions are correct?
    I cannot find anything in the BMW RepROM or any other manuals I have.
    Thanks for helping.
    Attached Images Attached Images

  2. #2
    Registered User lkraus's Avatar
    Join Date
    Nov 2011
    Location
    Central Ohio
    Posts
    1,811
    I hope to take the tupperware off of mine in the next few days for new shocks. Will try to trace out those hoses for you if you do not have an answer by then.
    Larry
    2006 R1200RT

  3. #3
    Registered User
    Join Date
    Apr 2020
    Location
    Inman, SC
    Posts
    7
    I hope to take the tupperware off of mine in the next few days for new shocks. Will try to trace out those hoses for you if you do not have an answer by then.

    Thanks Larry

  4. #4
    Registered User lkraus's Avatar
    Join Date
    Nov 2011
    Location
    Central Ohio
    Posts
    1,811
    Hoses1.jpg
    Hoses2.jpg

    I hope this clarifies your hose routing. The ABS (A) vent line runs down between the ABS module and the front of the airbox, over the the air intake and down behind the frame. The line (T) from the valve above the charcoal canister runs down to the vacuum port on the left throttle body and clips to the side of the airbox. The other vent line runs to the bottom of the charcoal canister (V).

    The full-res pictures are in my Dropbox temporarily in case they are not clear here:https://www.dropbox.com/sh/xj38pbysd...wKg9XstNa?dl=0.

    I'll probably be a day or two putting things back together if you need more pictures.
    Larry
    2006 R1200RT

  5. #5
    Fortis Fortuna Adiuvat Omega Man's Avatar
    Join Date
    Jan 2010
    Location
    Mansfield,MA
    Posts
    16,463
    Great pictures Larry

    OM
    "You can do good or you can do well. Sooner or later they make you choose." MI5
    Mod Squad
    2009 F800GS 1994 TW200

  6. #6
    Registered User
    Join Date
    Apr 2020
    Location
    Inman, SC
    Posts
    7
    Thanks Larry
    Very detailed description and photos.
    Exactly what I was looking for.

Similar Threads

  1. Breather Hose Installation 2009 R1200RT
    By mark216 in forum Hexheads/Camheads
    Replies: 1
    Last Post: 01-05-2021, 12:14 PM
  2. Dangling R1150RT Breather hoses
    By dksquires in forum Oilheads
    Replies: 8
    Last Post: 01-09-2006, 10:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •