Results 1 to 7 of 7

Thread: Cold acceleration

  1. #1
    CAL0987
    Join Date
    Oct 2010
    Location
    Pahrump NV
    Posts
    54

    Cold acceleration

    I have a 1998 F650 that i noticed lately as it has gotten colder out that the acceleration is very sluggish.
    It gets better as the engine warms up.
    Definitely much better when the choke is on, which is needed to even get it to drive.

    But I noticed today that even after riding for 30 minutes and letting the engine warm , that when i turn down the choke, that the acceleration is still lackluster.
    When I turn the choke back up it accelerates like i feel it should.

    And i don't think i should drive with the choke on all the time!
    Carburetor adjustment needed?
    Something else?
    Just serviced the carbs , but did not make any special adjustments, except idle to factory spec.

  2. #2
    Quote Originally Posted by cal0987 View Post
    I have a 1998 F650 that i noticed lately as it has gotten colder out that the acceleration is very sluggish.
    It gets better as the engine warms up.
    Definitely much better when the choke is on, which is needed to even get it to drive.

    But I noticed today that even after riding for 30 minutes and letting the engine warm , that when i turn down the choke, that the acceleration is still lackluster.
    When I turn the choke back up it accelerates like i feel it should.

    And i don't think i should drive with the choke on all the time!
    Carburetor adjustment needed?
    Something else?
    Just serviced the carbs , but did not make any special adjustments, except idle to factory spec.
    There is an often cited rule: go back where you were last. It sounds like with the choke off it is running lean but using the choke enrichens it so it runs better. So I would check for partially clogged jets or some other reason it is running lean.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://web.bigbend.net/~glaves/

  3. #3
    CAL0987
    Join Date
    Oct 2010
    Location
    Pahrump NV
    Posts
    54
    Replaced the jets when i did the carbs.. at least i think i did... i assume they come with the carb kit.
    I also put in an inline fuel filter after the tank valve?
    Is there something i can adjust to change the Lean?

  4. #4
    Quote Originally Posted by cal0987 View Post
    Replaced the jets when i did the carbs.. at least i think i did... i assume they come with the carb kit.
    I also put in an inline fuel filter after the tank valve?
    Is there something i can adjust to change the Lean?
    Idle mixture is adjustable. Fuel level in the float bowls should be checked. If it is too low the bike wil run lean. Fuel float level is adjustable.

    I would verify that the needle jet and is correct for that bike. I am not sure if the needle position is adjustable on those carbs but if so raising the needles one notch might fix it.
    Last edited by PGlaves; 01-01-2021 at 03:10 PM.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://web.bigbend.net/~glaves/

  5. #5
    SURVIVOR akbeemer's Avatar
    Join Date
    Jul 2007
    Location
    Big Sky Country
    Posts
    8,324
    This exchange is a demonstration of the corollary to the quote in Paulís signature line (The greatest challenge to any thinker is stating the problem in a way that will allow a solution.) The corollary is that hardest part of fixing a mechanical problem is determining what needs to be fixed. I find that I have a fair ability to fix mechanical problems, but unfortunately a mediocre ability to determine what problem requires fixing. Thankfully this forum provides valuable assistance in diagnosing problems.
    Kevin Huddy
    The Outpost, Silver City, Montana
    Never have more ambition than adhesion.

  6. #6
    Quote Originally Posted by akbeemer View Post
    I find that I have a fair ability to fix mechanical problems, but unfortunately a mediocre ability to determine what problem requires fixing. Thankfully this forum provides valuable assistance in diagnosing problems.
    On several occasions I have opined that electrical problems are usually the easiest problems to fix. And on an equal number of occasions I have been challenged and derided for that opinion. Until I explain that they are almost always easy to fix but range from difficult to impossible to find. Happy New Year.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://web.bigbend.net/~glaves/

  7. #7
    CAL0987
    Join Date
    Oct 2010
    Location
    Pahrump NV
    Posts
    54
    Quote Originally Posted by PGlaves View Post
    Idle mixture is adjustable. Fuel level in the float bowls should be checked. If it is too low the bike wil run lean. Fuel float level is adjustable.

    I would verify that the needle jet and is correct for that bike. I am not sure if the needle position is adjustable on those carbs but if so raising the needles one notch might fix it.
    Yes, when I serviced the carbs, i did adjust the float level by bending the levers on te floats...

    I just regret having to take the carbs apart again!!

Similar Threads

  1. Replies: 11
    Last Post: 12-01-2011, 03:23 PM
  2. Acceleration!!!
    By 98lee in forum Campfire
    Replies: 27
    Last Post: 09-01-2009, 05:40 PM
  3. What is acceleration?
    By PAULBACH in forum Campfire
    Replies: 10
    Last Post: 06-24-2008, 11:13 PM
  4. Valve Adjust - How cold is cold enough?
    By PacWestGS in forum Oilheads
    Replies: 13
    Last Post: 10-26-2006, 11:21 PM
  5. Help! K75 has no acceleration
    By SweetT in forum Flying Brick K-bikes
    Replies: 16
    Last Post: 07-07-2004, 12:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •