Results 1 to 9 of 9

Thread: Likely a long shot....need heated seat connector

  1. #1
    Registered User
    Join Date
    Jul 2018
    Location
    Bryan TX
    Posts
    15

    Cool Likely a long shot....need heated seat connector

    Looking for the driver seat connector. If I'm correct....BMW does not offer that part probably since it is part of the heat pad. If someone has a heated seat that no longer works perhaps cut the connector off and I could splice it. The harness for the bike side can be bought so I'm good there unless that's also available. Thought I'd ask.....want to get that wiring back to OEM. Thanks so much!
    '07 RT in Silver

  2. #2
    Pepperfool GSAddict's Avatar
    Join Date
    Feb 2008
    Location
    Sechelt, British Columbia
    Posts
    3,372
    Send me a PM. I might be able to help you.
    '
    Ufda happens..........

    Need your R11xx Hall sensor rewired? PM me.

  3. #3

    Repair Plugs

    If you look at the Classic Parts Fiche site at one of the bigger dealer sites you can find replacement connectors that are not too unreasonable. I just bought a connector in order to wire an aftermarket set of horns. It helped me avoid cutting into any of the factor wiring. This is the link to the MaxBMW site, but others have them as well.
    https://shop.maxbmw.com/fiche/Diagra...6&rnd=09082020

    good luck

  4. #4
    Pepperfool GSAddict's Avatar
    Join Date
    Feb 2008
    Location
    Sechelt, British Columbia
    Posts
    3,372
    This part will work

    83 30 0 402 344

    https://shop.maxbmw.com/fiche/PartsS...ts=83300402344
    '
    Ufda happens..........

    Need your R11xx Hall sensor rewired? PM me.

  5. #5
    Registered User
    Join Date
    Jul 2018
    Location
    Bryan TX
    Posts
    15
    Appreciate the tips everyone. Should be able to figure something out that will work for me
    '07 RT in Silver

  6. #6
    Roger...check your email...call me.

    Gregg


    Sent from my iPad using Tapatalk

  7. #7
    Registered User
    Join Date
    Jul 2018
    Location
    Bryan TX
    Posts
    15
    Connectors found. Thanks rangemaster
    '07 RT in Silver

  8. #8
    Registered User AjaxTheDog's Avatar
    Join Date
    Jun 2013
    Location
    Highlands Ranch, CO
    Posts
    287

    An alternative

    Buy one of these, remove the pins from the old connector and reinstall in the connector of your choice that uses the same pins. Say goodbye to BMW's proprietary connector plugs at ripoff prices.

    Capture.JPG
    Bill in Highlands Ranch, Colorado
    2017 R1200RT
    2007 Eton Beemer Scooter

  9. #9

    Likely a long shot....need heated seat connector

    The seat connectors are made by Tyco...and on the OPís bike the previous owner had cut off and discarded both the seat and bike-side connectors to wire another heated seat.

    I did some research and pointed him to this:




    CNKF 5 Sets AMP/Tyco sensor 2 way male female auto plug waterproof connectors for BWM Porsche benz 968405-1 7-967570-3
    by Kaifa elec
    Learn more: https://www.amazon.com/dp/B07F8MT6NL...ing=UTF8&psc=1

    5 sets for $21 delivered isnít bad, and they are also used elsewhere on the bike so youíll have spares.

    Sent from my iPad using Tapatalk

Similar Threads

  1. '08 RT - heated seat connector? (seat end)
    By W7lej1 in forum Hexheads/Camheads
    Replies: 4
    Last Post: 02-25-2018, 01:49 AM
  2. Replies: 11
    Last Post: 05-19-2017, 03:46 AM
  3. heated seat connector part no?
    By rpmiller in forum Hexheads/Camheads
    Replies: 1
    Last Post: 10-14-2008, 06:10 PM
  4. Heated Russell Day-Long seat
    By Harrington in forum Gear
    Replies: 6
    Last Post: 12-31-2006, 03:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •