Hose diagram,airbox/carbs/gas tank
Trying my hand at working on a 1998 F650 this time!
Took a while to take the bike apart to get to the carbs. Did some replacement parts on the carbs and again a while to get it back together.
After assembly, it seems i have an extra drain hose unaccounted for....
SPent a long time online trying to find a good hose routing diagram for the carb and Airbox, but not much out there.
So I made my own, I hope I reconnected everything correctly, was a little sloppy taking it apart.
Not sure where the extra drain hose attaches to, it is on the left side , under the battery tray.
Also more fun: discovered after assembling everything, that when i went to connect the fuel line to the Petcock, it was about 2" short.
The hose must have bee run from the carb facing the engine, and i ran it back way from the engine and around the fram.
Rather than taking everything out again , decided to add some more hose to bridge the gap... seems the easiest way
Trying my hand at working on a 1998 F650 this time!
Took a while to take the bike apart to get to the carbs. Did some replacement parts on the carbs and again a while to get it back together.
After assembly, it seems i have an extra drain hose unaccounted for....
SPent a long time online trying to find a good hose routing diagram for the carb and Airbox, but not much out there.
So I made my own, I hope I reconnected everything correctly, was a little sloppy taking it apart.
Not sure where the extra drain hose attaches to, it is on the left side , under the battery tray.
Also more fun: discovered after assembling everything, that when i went to connect the fuel line to the Petcock, it was about 2" short.
The hose must have bee run from the carb facing the engine, and i ran it back way from the engine and around the fram.
Rather than taking everything out again , decided to add some more hose to bridge the gap... seems the easiest way
Last edited: